Home Heim
Product Range Produktpalette
About Superlite Über Superlite
Profile Profil
Technical Data Technische Daten
Showroom Showroom
Feedback Rückmeldung
Contact Us Kontaktieren Sie uns
E-mail E-Mail

SUPERLITE ASBESTOS FREE ACID-200 Superlite Asbestos Free Acid-200

Superlite ® Superlite ®
Basis Grundlage
Application Anwendung
Gasket material based on Aramid & Organic fibre with CSM binder. Dichtung Material auf der Grundlage von Aramid & Bio-Faser mit CSM Binder.
Premium quality acid jointing material. Premium Qualität Säure Zusammenfügen Material. A chemical grade material suitable for most acids, alkalies, oils, fuels and refrigerants for aggressive environments. Eine chemische Material geeignet für die meisten Säuren, Laugen, Öle, Brennstoffe und Kältemittel für aggressive Umgebungen.
GP 150 GP 150
Oil 220 Oil 220
Oil 250 Oil 250
Acid 200 Acid 200
Oil 250 C- 350
Oil 250 Oil 250 H
Oil 250 GF 300
Factors affecting on the gasket Faktoren, die auf der Dichtung
Areas of application Bereiche der Anwendung
The suitability of a gasket material  for an application is dependent upon a multiplicity of factors as shown in the above digram. Die Eignung der Dichtung ein Material für eine Anwendung ist abhängig von einer Vielzahl von Faktoren wie in dem oben digram. Max. temperature and pressure values can not define the suitability for application. Temperatur-und Druck-Werte können nicht definieren, die Eignung für die Anwendung. It is always advisable to consider these factors when selecting a material for a given application. Es ist immer ratsam zu prüfen, diese Faktoren bei der Auswahl eines Materials für eine bestimmte Anwendung.
1) This area refer , the gasket material is normally suitable subject to chemical compatibility. 1) In diesem Bereich finden, die Dichtung Material ist in der Regel geeignet, die chemische Kompatibilität.
2) This area refer, the gasket material may be suitable but a technical support is recommended. 2) Dieser Bereich beziehen, die Dichtung Material geeignet sein könnte, aber eine technische Unterstützung wird empfohlen.
3) This area refer, do not install the gasket without technical evaluation. 3) Dieser Bereich beziehen, nicht installieren Sie die Dichtung ohne technische Bewertung.
Dimensions of the standard sheets Abmessungen der Standard-Bogen
1500 mm X 1500 mm, 1500 mm X 2250 mm, 1500 mm x 4500 mm,1500 mm X 1125 mm, 1500 mm X 1000 mm, 1500 mm x 2000 mm,1500 mm X 4000 1500 mm x 1500 mm, 1500 mm X 2250 mm, 1500 mm x 4500 mm, 1500 mm X 1125 mm, 1500 mm X 1000 mm, 1500 mm x 2000 mm, 1500 mm X 4000
Specification : Spezifikation:
ASTMF 104 F 712000 A9 M5 ASTMF 104 F 712000 A9 M5
Technical data Technische Daten
All data are typical values and refer to sheet thickness of 1.5 mm Alle Daten sind typische Werte und beziehen sich auf Blechdicke von 1,5 mm
Specification Spezifikation
Max. Operating Temperature Betriebstemperatur 200
°C ° C
Max. Operating Pressure Betriebsdruck 60
bar
Density Dichte ASTM F 1315 ASTM F 1315 1.8 1/8
g/cm³ g / cm ³
Compressibility Kompressibilität ASTM F 36 J ASTM F 36 J 8
%
Recovery ASTM F 36 J ASTM F 36 J 50
%
Tensile Strength Zugfestigkeit ASTM F 152 ASTM F 152 10
N/mm² N / mm ²
Creep Relaxation Creep Entspannung ASTM F 38 B ASTM F 38 B 40
%
Gas Sealability Gas Abdichtbarkeit ASTM F 37 B ASTM F 37 B < 1.0 <1,0
ml/min. ml / min.
pH resistance pH-Wert von Widerstand 1 - 11 1 bis 11
pH pH-Wert
Thickness Increase Dicke Erhöhung DIN 3754 it 'S' DIN 3754 es' S '
Nitric Acid (40%) Salpetersäure (40%) 15
%
Sulphuric Acid (96%) Schwefelsäure (96%) 15
%
Sulphuric Acid (65%) Schwefelsäure (65%) 10
%
All information and recommendations given in this brochure are correct to the best of our knowledge. Alle Informationen und Empfehlungen in dieser Broschüre sind nach bestem Wissen und Gewissen. However, in view of the wide varity of possible installation and operating conditions one cannot draw the final conclusion in all application cases regarding the behaviour in a gasket joint. Allerdings, in Anbetracht der Vielzahl der möglichen Montage-und Betriebsbedingungen kann man nicht ziehen die endgültige Abschluss in allen Fällen Anwendung in Bezug auf das Verhalten in einer gemeinsamen Dichtung. Therefore, information can only serve as a guideline. Daher können Informationen dienen nur als Richtschnur.
Best view at 1024 x 768 resolution / Site designed & maintained by :- HardSoft Solutions. Beste Ansicht bei 1024 x 768 Auflösung / Site gestaltet und betreut von: - HardSoft Solutions.